Best Rod Holders for Pontoon Boat: 5 Rail-Mount Picks
Pontoon boats are great fishing platforms, but they have few places to put a rod. There is no gunwale to...
Pontoon boats are great fishing platforms, but they have few places to put a rod. There is no gunwale to drill into and the deck is carpet or vinyl. The answer is a holder that clamps to the rail, and the most important spec is whether it fits your rail: round or square, and what diameter.
This guide compares five rail-mount rod holders and systems for pontoon boats from Brocraft, Scotty, PLUSINNO, and ExplorewithPassion. We compared rail fit, adjustment, materials, rod retention, and how many rods each one holds. For holders for kayaks, gunwales, and the bank, see our main rod holders guide.
Our Top Picks
| Best for | Product | FH Score About FH ScoreThe FH Score is our editorial rating from 0 to 10, based on published specs, materials, warranty and value. It is not based on Amazon ratings and is never influenced by commissions. Learn more › | |
|---|---|---|---|
| Best overall |
Brocraft Pontoon Rail Rod Holder
|
7.5/10 | Check Price |
| Best for Scotty holders |
Scotty 243 Square Rail Mount
|
7.6/10 | Check Price |
| Best tool-free clamp |
PLUSINNO Clamp-On Rod Holder
|
7.5/10 | Check Price |
| Best rod lock |
ExplorewithPassion Clamp-On Rod Holder
|
6.9/10 | Check Price |
| Best for spider rigging |
Brocraft Pontoon Crappie Rod Holder System
|
6.9/10 | Check Price |
The Picks in Detail
Brocraft Pontoon Rail Rod Holder
Why it made the list: This Brocraft holder is made for pontoon rails and fits the three most common sizes: 7/8 inch and 1 inch round, and 1-1/4 inch square. It rotates 360 degrees, the rod angle is adjustable, and it clicks through 12 rest positions so it stays where you set it. The body is fiberglass-injected nylon, which does not rust.
Key specs: Fits 7/8 in and 1 in round rails and 1-1/4 in square rails; 360-degree rotation; adjustable rod angle; 12 rest positions; fiberglass-injected nylon.
Skip it if: you troll with heavy rods and big lures. A heavier holder system or a model with a rod lock is safer.
Pros
- Fits most pontoon rails
- No drilling
- Will not rust
Cons
- No strap to lock the rod in
- Nylon is not as stiff as metal holders
Scotty 243 Square Rail Mount
Why it made the list: Scotty’s post-mount system lets you swap rod holders, cup holders, and other accessories on one base. The 243 clamps to 1-1/4 inch square rails with stainless fasteners and accepts all Scotty post-mount rod holders, so you can pick the holder style you want. Scotty sells the 245 for round rails.
Key specs: Fits 1-1/4 in square rails; stainless steel fasteners; works with all Scotty post-mount rod holders and accessories; no drilling. Rod holder sold separately.
Skip it if: your pontoon has round rails. Use the Scotty 245 or the Brocraft, which fits both.
Pros
- Swap holders and accessories on one mount
- Stainless hardware
- Wide choice of Scotty holders
Cons
- Holder sold separately
- Square rails only
PLUSINNO Clamp-On Rod Holder
Why it made the list: The PLUSINNO clamp opens from about 0.59 to 3.94 inches and uses a double-V jaw with a silicone pad, so it grips round rails, square tubes, and flat edges without tools. The body is die-cast aluminum with stainless screws, it rotates 360 degrees with fine angle steps, and a strap holds the rod in if a fish hits hard. It is sold in 1, 2, and 4 packs.
Key specs: Clamp range 0.59 to 3.94 in; round, square, or flat surfaces; die-cast aluminum with stainless screws; silicone pad; 360-degree rotation with 10-degree adjustment steps; rod strap; tool-free install.
Skip it if: you want holders that stay on the boat all season with locking hardware. A fixed mount like the Scotty 243 is more permanent.
Pros
- Fits round, square, and flat mounts
- Rod strap prevents loss
- Moves easily between boats and docks
Cons
- Clamp knob can loosen and needs checking
- Less proven brand than Scotty
ExplorewithPassion Clamp-On Rod Holder
Why it made the list: This holder uses an aluminum C-clamp with a silicone pad that fits round rails from 0.50 to 1.66 inches, which covers standard pontoon rails. It locks the rod in two ways: a sliding loop over the handle and a bungee cord through the reel. It rotates 360 degrees horizontally and vertically with large twist knobs.
Key specs: C-clamp range 0.50 to 1.66 in (round rails); aluminum clamp and base; ABS body; silicone pad; sliding lock loop plus bungee cord; 360-degree rotation.
Skip it if: your rails are square. The Brocraft or PLUSINNO fits square tube.
Pros
- Two-way rod retention
- Large, easy knobs
- Works on docks and piers too
Cons
- Not listed for square rails
- ABS body is lighter duty
Brocraft Pontoon Crappie Rod Holder System
Why it made the list: Crappie anglers often slow-troll several rods off the front of the boat. This Brocraft system clamps to a 1 inch round or 1-1/4 inch square rail and holds four rods on a 24 inch crossbar with an 8 inch extension. Each holder adjusts for angle, and the kit can also mount to a side or deck.
Key specs: Holds 4 rods; 24 in crossbar; 8 in extension height; fits 1 in round and 1-1/4 in square rails; adjustable rod angle; side or deck mount included.
Skip it if: you fish one or two rods at a time. Single holders are simpler and cheaper.
Pros
- Four rods from one mount
- Made for slow trolling
- Adjustable angle on each holder
Cons
- Bulky when not in use
- Not for 7/8 in rails
Pontoon Rod Holders Compared
| Holder | Round rail | Square rail | Rods | Rod lock |
|---|---|---|---|---|
| Brocraft Pontoon Rail | 7/8 and 1 in | 1-1/4 in | 1 | No |
| Scotty 243 | No (245 for round) | 1-1/4 in | 1 (holder separate) | Depends on holder |
| PLUSINNO | 0.59 to 3.94 in clamp | Yes | 1 | Strap |
| ExplorewithPassion | 0.50 to 1.66 in | Not listed | 1 | Loop and bungee |
| Brocraft Crappie System | 1 in | 1-1/4 in | 4 | No |
How We Picked
We did not install these holders for this guide. We researched each one and compared the specifications published by the makers on their websites and Amazon listings. Our criteria:
- Rail fit for common pontoon rail sizes.
- Adjustment in rotation and angle.
- Materials that resist corrosion.
- Rod retention to prevent losing a rod.
- Value.
Several well-known holders, including the Scotty 284 with square rail mount and Attwood rail-mount holders, were out of stock on Amazon when we compiled this guide. The FH Score in each product box is our editorial rating, built from five weighted criteria: performance for the job, build quality, versatility, warranty and value. Holders with no published warranty get a lower warranty score. It is not based on Amazon ratings. See how it works on our How We Review page.
How to Choose Pontoon Rod Holders
Measure your rail first
Pontoon rails are usually 1 inch or 7/8 inch round tube, or 1-1/4 inch square tube. Measure the outside of the rail and check whether it is round or square before you buy.
Clamp or fixed mount
Tool-free clamps move easily and fit many sizes, but check them during the day. Bolted rail mounts with stainless hardware stay put all season.
Keep rods secure
A strap, loop, or locking cradle keeps a rod in the holder when a big fish hits or the boat bounces. Use one when trolling.
Plan rod spread
Set holders so lines do not cross, with longer rods toward the front corners for spider rigging. Keep walkways clear for passengers.
Related Guides
- Best Rod Holders
- Best Fishing Rod Holders for Garage
- Best Trolling Motors
- Best Crappie Jigs
- Best Trolling Motor for Pontoon Boats
- Best Fish Finder for a Pontoon Boat
- Best Rod Holders for Trolling
See more in our Rod Holders section.
FAQ
What size are pontoon boat rails?
Most are 1 inch or 7/8 inch round tube, or 1-1/4 inch square tube. Measure yours to be sure.
Do I need to drill to add rod holders to a pontoon?
No. Rail-mount holders clamp on, so there is no drilling.
How many rod holders do I need on a pontoon?
One or two per angler is typical. Crappie anglers who spider rig may use four to eight rods off the front.
Final Thoughts
The Brocraft Pontoon Rail Rod Holder is our top pick because it fits round and square rails and costs little. Choose the Scotty 243 to build a Scotty holder system on square rails, the PLUSINNO for a tool-free clamp that fits almost anything, the ExplorewithPassion holder for two-way rod retention on round rails, and the Brocraft Crappie System for slow trolling four rods.
